Banner SureCross DX80 Wireless Networks User Manual

Page 55

One event log and three data logs may be created. The event log saves events based on changes occurring in defined registers. The
data logs store register data based on a periodic rate defined by the user. Select the event log or one of the three data logs using the
Next and Prev buttons.

Enable
Log-
ging

Select the checkbox to turn on the data logger.

File
Name

The file name must be contain no more than
eight characters and include the file exten-
sion .txt. Only alpha-numeric characters are al-
lowed in the file name.

Log
Rate

The data logger logs at the rate given in
HH:MM:SS (hours, minutes, seconds). Logging
is disabled if the rate is zero. To activate contin-
uous logging, set the log only when register
number is zero, the Enable Logging box is se-
lected and the rate is not zero. To tie data log-
ging to a schedule, select the Enable Logging
checkbox and verify the log only when register
number contains a valid local register number
with content greater than zero.

Prev
and
Next

Scrolls through the log file types. The system al-
lows for one event log and three data logs.

Reset
Errors

Resets status error messages or conditions.

Status

Displays a complete list of error conditions. For a
list of error codes, refer to Appendix B, Error Co-
des.

Update Clicking the Update button sends information to

the Ethernet Bridge or GatewayPro or retrieves
information depending on which checkboxes are
selected: Change or Get/Send All. Updating in-
formation does not save configuration informa-
tion permanently to the XML file.

File Names and Storage

The file name entered is the first part of the generated name. The file creation date in the format YYYYMMDD is appended to the sup-
plied name, allowing multiple files with the same user-supplied name to have unique file names. If the name is changed after data is
logged with the old name, manually delete the old files from the File List page. The Discard Oldest option only finds files with the same
name listed under the File Name.

SureCross Web Configurator

rev. -