Banner SureCross DX80 Wireless Networks - Manual (Page 4)

After entering the IP address, the home web page for the SureCross device displays. To log in, click on any tab at the top of the page. To
log out, close the browser.
For user-level access, enter the following as the user name and password.
• User name: system
• Password: admin
For Admin-level access, enter the following as the user name and password:
• User name: root
• Password: sxi
Admin-level access allows administrators to set up system users and their passwords. Admin-level access is also required to change the
IP address of the system.
Changing the Device's IP Address
Once logged into the system, use the page tabs at the top of the page to select the path: System > Setup > Network. To change the
Ethernet Bridge or GatewayPro’s IP address:
1. Type in the new IP address
2. Click the Change IP button.
3. Cycle power to the device. The IP address change activates when the device reboots.
SureCross Web Configurator
4 www.bannerengineering.com - tel: 763-544-3164 rev. -