Banner SureCross DX80 Wireless Networks User Manual
Surecross dx80 gatewaypro, The surecross® dx80 wireless network

GatewayPro models for protocol conversion or web-based configuration
2.4 GHz
900 MHz
The SureCross® wireless system is a radio frequency network with integrated I/O that can
operate in most environments and eliminate the need for wiring runs. Wireless networks are
formed around a Gateway, which acts as the wireless network master device, and one or
more Nodes.
• 10 to 30V dc power input
• Modbus serial interface and Ethernet interface
• Site Survey analyzes the network’s signal strength and reliability and displays the results
on the Gateway's LCD
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Ac-
cess (TDMA) control architecture ensure reliable data delivery within the unlicensed Indus-
trial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node, includ-
ing fully acknowledged data transmission
For additional information, updated documentation, and accessories, refer to Banner Engi-
neering's website,
.
Models
Feature
Frequency
Antenna
DX80P9T6S
Modbus/TCP or EtherNet/IP communication
protocol
900 MHz ISM Band
External
DX80P9T6W
Internal
DX80P2T6S
2.4 GHz ISM Band
External
DX80P2T6W
Internal
DX80P9A6S
Modbus/TCP protocol, Configuration capabil-
ity using the Web Configurator
900 MHz ISM Band
External
DX80P9A6W
Internal
DX80P2A6S
2.4 GHz ISM Band
External
DX80P2A6W
Internal
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
The SureCross® DX80 Wireless Network
Gateway
Node
Node
FlexPower Node
and Battery Supply Module
The SureCross® DX80 wireless I/O network provides reliable moni-
toring without wiring or conduit installation. The SureCross wireless
network operates independently or in conjunction with a host system,
PLC, and/or PC software.
Each wireless network system consists of one Gateway and one or
more Nodes. Devices ship with factory-defined discrete, analog, or a
mix of discrete and analog inputs and outputs.
The SureCross® DX80 network is a deterministic system—the net-
work identifies when the radio signal is lost and drives relevant out-
SureCross DX80 GatewayPro
P/N 131933 Rev. F
5/23/2013
0 131933
1