Weekly schedule, Weekly schedule, holidays expanded view – Banner SureCross DX80 Wireless Networks User Manual

Page 51

Weekly Schedule

Use the Weekly Schedule page to manage weekly activities.

Before setting any schedules, verify the system’s time and date are accurately set in the System > Setup > Time and Date tab.

During the On Time, the On Value is applied to the given register. The remainder of the time, the register is set to the Off Value. The On
and Off Values are applied once at the start of the On Time, when the system is rebooted, and when the system clock is changed
(System > Setup > Time and Date screen).

Astronomical Clock

The astronomical clock will not work unless latitude, longitude, and time zone are set in the Time and Date tab.

To reference the astronomical clock instead of fixed time of day, enter DAWN or DUSK in place of the HH:MM:SS on and off times. An
offset in minutes may also be included. To specify one half hour after sunrise, enter dawn+30. To specify one half hour before sunset,
enter dusk-30, etc. Upper/lower case is ignored, but do not include any spaces in the dawn/dusk string.

Duplicating and Schedule

Instead of duplicating a schedule entry to activate multiple outputs, make a single schedule entry that applies to a single register then
cascade that register to any number of other registers with cascade rules set up on the System > Action Rules > Cascade page.

Weekly Schedule, Holidays Expanded View

Access the holiday expanded view by clicking the Holidays link on the main Weekly Schedule page.

The schedule entry affected shows on the first line. The remainder of the page allows you to add and remove defined holidays from this
schedule event.

Excluding Holidays

To exclude holidays from the scheduled event:

1. Select a holiday from the Available Holidays list.
2. Click the Add button.
3. Click on the Exclude radio button.

Once a holiday is added to the schedule, the scheduled event that normally happens on the selected days will not occur if one of the
selected days falls on one of the excluded holidays.

In the example screen shown below, six holidays are excluded from the scheduled event #1 when they fall on a weekday.

SureCross Web Configurator

rev. -