Banner U-GAGE T30U—Level Control - Manual

Ultrasonic Sensors with TEACH-Mode Programming
• Fast, easy-to-use TEACH-Mode programming; no potentiometer adjustments
• Choose to set a specific window size and position, or a set point centered within its own 10 mm window, for either or
both outputs
• Program both outputs together or independently. The two outputs may be identical, independent, overlapping, or com-
plementary
• Remote TEACH for security and convenience
• Choose models with 150 mm to 1 m range (5.9 in to 39.4 in) or 300 mm to 2 m range (11.8 in to 78.7 in)
• Wide operating range of -20° to +70°C (-4° to +158°F)
• Choose models with either NPN or PNP dual discrete outputs
• LED indicators for Power ON/OFF, Signal Strength, and Discrete Outputs Conducting
• Choose models with integral unterminated 2 m (6.5 ft) or 9 m (30 ft) or with Euro-style QD connector
• Compact, self-contained sensor package
• Rugged design for use in demanding sensing environments; rated IEC IP67, NEMA 6P
ULTRASONIC
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
device does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
Models
Models Range and Frequency Cable 1 Supply Voltage Discrete Output Response Time
T30UDNA
T30UDNAQ
150 mm to 1 m
(5.9 in to 39 in)
228 kHz
2 m (6.5 ft)
5-pin Euro QD
12 to 24V dc
NPN (sinking)
48 ms
T30UDPA
T30UDPAQ
PNP (sourcing)
T30UDNB
T30UDNBQ
300 mm to 2 m
(11.8 in to 79 in)
128 kHz
NPN (sinking)
96 ms
T30UDPB
T30UDPBQ
PNP (sourcing)
Overview
The U-GAGE is an easy-to-use ultrasonic sensor, ideal for demanding environments. Simple push-button programming provides flexibility for a variety of applications.
Excellent for gauging applications such as sensing of liquid levels in a tank or for sensing most clear materials.
Each sensor includes two discrete outputs, which may be programmed independently with different window limits or together with identical limits. Each output has the
option of being set with a sensing distance set point centered within a 10 mm window.
1 9 m (30 ft) cables are available by adding suffix W/30 to the model number of any cabled sensor (for example, T30UDNA W/30). A model with a QD connector requires an optional mating
cable; see
Cordsets on page 7.
U-GAGE® T30 Series with Dual Discrete Outputs
P/N 059200 Rev. E 2/14/2013
0 059200 6