Banner U-GAGE T30U—Level Control User Manual

U-gage, Chemically resistant ultrasonic sensors, Features

Printed in USA

05/05

P/N 122155

U-GAGE

Chemically Resistant Ultrasonic Sensors

Teflon®-protected sensors for harsh environments

Features

• Available option for all Banner QT50U and T30U..B models.

• Factory-installed Teflon flange and film coating bonded over the transducer provide

protection from harsh environments.

• The flange is sealed to the sensor face using a Viton

o-ring; other o-ring materials

may be specified (contact factory).

• Performance specifications for these models are identical to those of corresponding

standard models, with the exception of reduced sensing range (see Performance

Curves below).

• Sensor dimensions and mounting vary somewhat from corresponding standard

models (see dimensions on reverse).

Teflon

is a registered trademark of Dupont

™

Viton

is a registered trademark of Dupont Dow Elastomers

Models

Add suffix “-CRFV” to the model number of any standard QT50U or T30U..B model

sensor to get this option. For example: QT50ULBQ6-CRFV or T30UINB-CRFV. Consult

factory for information on T30U..A models.

Performance Curves

QT50U Max. Sensing Range: 200 mm to 8 m (8" to 26')

QT50U Effective Beam Pattern (Typical)

T30U..B Max. Sensing Range: 300 mm to 1.5 m (12" to 5')

T30U..B Effective Beam Pattern (Typical)

��

�

��

�

��

��

��

�

��

�

��

�

��

��

This manual is related to the following products:

U-GAGE T30U—Pump Control U-GAGE QT50U DC Series—Analog U-GAGE T30U—Discrete U-GAGE T30U—Analog U-GAGE T30U Ultrasonic Sensors U-GAGE QT50U Ultrasonic Sensors