Bird Technologies SA-6000XT-Manual - Manual (Page 74)

58
4. Do one of the following:

To save a trace, see “Saving a Trace” on page 58.

To recall a trace, see “Viewing a Recalled Trace” on page 60.
5. Press the Eject soft key to end USB operation.
6. Remove the USB drive.
Note: the light on the USB drive might still be lit after EJECT and it is
ok to remove it from the SA-XT.
Saving a Trace
Note: This feature is only available if the unit is NOT connected to a
PC. If the unit is connected to a PC, this feature will be disabled.
1. Press the Save/Recall softkey.
2. Press the Save softkey which automatically opens the text label screen.
Note: If the numeric shortcuts are off, press a number key once to
enter a number. If the shortcuts are on, press the key twice. Shortcuts
are turned off by default. Refer to Label Text Shortcuts, page 64 for
more information about numeric shortcuts.
Note: The items on the Save and Recall list are automatically sorted
by the text field using the order blank, numeric, alpha characters.
3. Enter the name of file.

Use the right and left scroll keys to select a character column.

Press the up and down scroll keys to move the text cursor to select a
character in the label text (type over function).

Press the softkey to enter the letter indicated at its right.

Press the Delete key to remove the character immediately at the left of
the text cursor.
4. Press the Enter key to accept the label text.
5. Press the Esc key to exit Save and Recall mode.
Figure 55 Save Trace Screen