Bird Technologies SA-6000XT-Manual - Manual (Page 19)

3
Site Analyzer Features
General

Easy to operate and field ready for first-time, occasional, and experi-
enced users.

High-resolution color display.

Field replaceable Li-ion battery.

Automatic power down conserves battery life.

Operates in temperatures as low as 14°F (–10°C).
Antenna Test

Rejects on-channel interfering signals to +13 dBm.

Three user-selectable trace capture options: 238 data points per sweep,
475 data points per sweep, 949 data points per sweep.

Three graphic display formats: envelope, maximum, minimum.

Sweep measurement progress bar: indicates status of measurement
being taken.

Adjustable pass/fail limit with visual indicator.

64 MB of internal flash memory for storing thousands of traces and setups.

On-screen comparison between current measurement trace and
stored data traces – no PC required.

Pop-up menus contain over 70 cable types and 90 frequency band presets
depending upon the instrument model number.

X and Y scales and units are user adjustable.

Six markers for either direct or difference measurements. Can also
measure relative to limit line or recalled trace.

Measurement hold to temporarily store a trace.
Measure Match Mode

Fast swept measurement.

Frequency can be set using either Start/Stop or Center/Span frequen-
cies.

Measurement units can be Return Loss [dB], Cable Loss [dB], or VSWR [ratio].
Fault Location Mode

Transform Algorithm - Fast Fourier Transform (FFT) with three levels of
smoothing.

Distance units can be either feet or meters.

Measurement units can be Return Loss [dB] or VSWR [ratio].