Bird Technologies SA-6000XT-Manual - Manual (Page 12)

xii
Equations
Fault Location
Resolution
Maximum Distance
Chapter Layout
Introduction — Describes the features of the Bird Site Analyzer and provides
power-up instructions.
Calibration —
Lists the steps to calibrate the Site Analyzer, which must be
done before using Measure Match or Fault Location modes.
Measure Match Mode —
Lists the steps to make match measurements, as
well as providing instructions for all functions available in Measure Match
mode.
Fault Location Mode — Lists the steps to make distance to fault measure-
ments, as well as providing instructions for all functions available in Fault Loca-
tion mode.
Measure Power Mode —
Lists the steps to make power measure-ments, as
well as providing instructions for all functions available in Measure Power
mode.
General Operation — Describes how to save and recall traces, set limit lines,
and other basic functions common to all modes of the Site Analyzer.
Utilities —
Describes utilities to set up the Site Analyzer.
Computer Software —
Provides installation instructions and lists the fea-
tures of the Bird Site Analyzer PC Software.
Maintenance —
Lists routine maintenance tasks for the Site Analyzer, as well
as troubleshooting for common problems. Specifications and parts information
are also included.
where C = speed of light (300 x 10
6
m / sec) or (9.84252 x 10
8
feet / sec)
Resolution
C
freq span 2 
------------------------------- =
Max distance resolution data points 1 –    =