Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 53)

Collecting Performance Data Chapter 3
3. If necessary, select the FactoryTalk Transaction Manager
configuration for the activity area.
4. In the left pane of the dialog box, click Summarization
Criteria.
Summarization criteria take the form of a user-defined parameter,
similar to the Shift, Part Id, and Ideal Cycle Time parameters, for
which data can be collected. When the value of the parameter
changes, it triggers the summarization of historical performance data
for the activity area. The collected values can then be used to filter
OEE performance data for the activity area. For example, if your
system is configured to collect a user-defined summarization
criterion called Operator ID, you will be able to calculate the OEE
performance for the selected activity area when a particular operator
is running this equipment.
NOTE
User-defined summarization criteria are defined by the RSBizWare
administrator in the Service Console.
To configure summarization criteria:
1. In the Select Summarization Criteria list, select the
parameter for which you want to collect data.
2. Select one of the following options:
• Do Not Monitor the selected Summarization Criteria
for the Plant Model Activity Area.
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 53