Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 112)

Chapter 3 Collecting Performance Data
• This event is not used in calculating Fault Metrics.
• This event represents a Fault for the purposes of calculating
Fault Metrics.
• This event's collected value is used to calculate Fault
Metrics based on the Event Lookup Code List.
The availability of the options depends on the event trigger
that you selected in "Configuring the Event Trigger (page 93)",
and on whether you have selected the Manual Event option
for the particular event.
TIP
See "Manual Events (page 88)" for details.
3. Under Machine State, select one of the following:
• This event does not affect Machine State.
• When this event is active apply the selected Machine State.
If you select this option, select also a machine state from the
list:
To edit the state, click Edit States.
The Configuring Machine States dialog box appears.
TIP
See "Configuring the Machine States (page 123)" for
details.
• Apply the Machine State configure for the event's collected
value in the Event Lookup Code List.
112 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014