Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 254)

Chapter 8 FactoryTalk Metrics Icon Definitions
The table below lists the state icons that are applied to the plant
model element icons to define their states.
Icon State definition
The plant model element has performance parameters configured but is not
enabled.
The status of the plant model element is “Configured.”
The plant model element has performance parameters configured and is
enabled, but it is not collecting data.
The status of the plant model element is “Configured”.
The plant model element has performance parameters configured and is
waiting to receive initial data values.
The status of the plant model element is “Starting”.
The plant model element has performance parameters configured and is
waiting to receive initial data values.
The status of the plant model element is “Running”.
The Categories & Events tree view on the Configure Performance
Parameters dialog box shows the state of performance parameter
events and categories.
The table below lists the performance parameter event icons.
Icon Event or category
System-generated event.
System-generated event category.
User-defined event.
User-defined event category.
The table below lists the state icons that are applied to the
performance parameter event icons to define their states.
Icon State Definition
An event that is enabled or an event category that contains enabled events.
These events are not collecting data.
Performance Parameter
Event State Icons
254 Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014