Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 43)

Collecting Performance Data Chapter 3
In this dialog box you can configure the parameters that will be
used to collect performance data and measure the OEE rating
for the activity area.
The upper section of the dialog box provides basic information
on the activity area that you have selected, and the following
options that you can use with your activity area:
• Enable Manual Activity Area
Select this option if you want to create a manual workcell.
This indicates that the activity area can be configured
without data points assigned.
For more information, refer to "Configure FactoryTalk
Metrics Data Collection Parameters" in the Configuration
Console Online Help.
If the FactoryTalk Transaction Manager configuration
associated with this activity area is running and enabled for
online edits, you can edit the performance parameters of the
selected activity area without stopping the configuration. If
the configuration is running and not enabled for online
edits, you cannot make changes to the configuration until
the configuration is stopped.
The FactoryTalk Transaction Manager Live Data
Migration Tool allows you to enable configurations that are
not currently enabled for online edits. For additional
information about editing a running configuration and
using the FactoryTalk Transaction Manager Live Data
Migration Tool, refer to the
Online Edits Tutorial in the
FactoryTalk Transaction Manager online help.
• Enable Data Collection for this Plant Model Activity
Area
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 43