Rockwell Automation FactoryTalk Metrics User Guide - Manual (Page 47)

Collecting Performance Data Chapter 3
TIP
To delete the data point that you have selected, click
Clear.
5. (Optional) Set the actual ideal cycle time using a
FactoryTalk Transaction Manager expression:
1. Select the Use a FactoryTalk Transaction Manager
Expression to determine the Ideal Cycle Time value
check box.
2. Click Edit.
The Expression Editor - Ideal Cycle Time Expression
dialog box appears.
3. Create or modify the expression that you want to use.
If you use a FactoryTalk Transaction Manager
expression, the only data point it can reference is the one
that you have provided in the Data Point box.
How do I access the dialog box?
1. On the Configure menu, click FactoryTalk Metrics >
Lookup Lists > Part Id/Cycle Times.
The Part Id/Cycle Time Lookup List dialog box appears.
2. Do either of the following:
• Click Add.
• Select a lookup list, and then click Edit.
The Part Id/Cycle Time List Configuration dialog box
appears.
Use the Part Id/Cycle Time List Configuration dialog box to
configure a Part Id/Cycle Time Lookup List and its parameters:
• Default cycle time for Total Parts.
Configuring a Part ID/Cycle
Time Lookup List
Rockwell Automation Publication PLTMT-UM001M-EN-P-June 2014 47