Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual User Manual
Page 87

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
87
Create an RSLogix 5000 Software Project Chapter 5
Configure the Linking Device and Logix Block Properties
Use the following information to configure the linking device and Logix Block
module properties.
Configure Linking Device Properties
1.
In the Controller Organizer, right-click the linking device and
choose Properties.
The Module Properties dialog box appears.
In the General tab, you can rename the linking device, add a description,
set the IP address, and choose the type of electronic keying you prefer.
This manual is related to the following products:
- 1757-FFLDC2 FOUNDATION Fieldbus System User Manual 1757-FFLD4 FOUNDATION Fieldbus System User Manual 1757-FFLD2 FOUNDATION Fieldbus System User Manual 9308-RSFB1024ENE FOUNDATION Fieldbus System User Manual 9308-RSFB256ENE FOUNDATION Fieldbus System User Manual 9308-RSFB64ENE FOUNDATION Fieldbus System User Manual