Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 53)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 53
Create an RSFieldbus Software Project Chapter 3
Edit Link Attributes
This section describes how to change the attributes of links.
1. To change a link attribute, right-click selected links .
2. Use the block pop-up menu to make modifications as described in Table 2 .
Delete and Restore Links
Do these steps to delete and restore function block links.
1. To delete a link, use the Select tool and click the link in the Strategy
window.
2. Right-click the link and choose Delete.
A pop-up dialog box appears with a message.
Table 2 - Link Attributes
Menu Item Sub-menu item Action
Delete N/A Removes the link
Labels Show Link Label Displays the link label
Show Output Parameter Displays the output parameter
Show Input Parameter Displays the input parameter
Reference Point Ref. on Current Point Selected handle
(1)
is the reference point
Ref. on Previous Point Selected handle
(1)
is placed based on the position of
the previous handle
Ref. on Next Point Selected handle
(1)
is placed based on the position of
the next handle
Properties N/A Changes position, size, line, fill and text attributes
(1) See handle examples on page 54 .