Create a new fieldbus (h1) link – Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual User Manual
Page 33

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
33
Create an RSFieldbus Software Project Chapter 3
6.
Click OK.
The linking device is added to the HSE Host.
7.
Click the Advanced Options tab.
Use the default of ‘Creation based on Default Template.’ Clear the box to
make your own selections.
8.
Click OK.
The linking device is added to the HSE Host.
Create a New Fieldbus (H1) Link
Do these steps to associate the fieldbus with the H1 segment.
1.
In the Project window, right-click the linking device and choose
New Fieldbus.
This manual is related to the following products:
- 1757-FFLDC2 FOUNDATION Fieldbus System User Manual 1757-FFLD4 FOUNDATION Fieldbus System User Manual 1757-FFLD2 FOUNDATION Fieldbus System User Manual 9308-RSFB1024ENE FOUNDATION Fieldbus System User Manual 9308-RSFB256ENE FOUNDATION Fieldbus System User Manual 9308-RSFB64ENE FOUNDATION Fieldbus System User Manual