Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 23)

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011 23
RSFieldbus Software Basics Chapter 2
Alignment Toolbar
Do these steps to use the alignment buttons to align objects.
1. Select the object or objects you want to align.
2. Click one of the alignment buttons.
3. Click the anchor object (object to which you want to align the other
objects).
Toolbar Icon Description
Aligns the left side of the objects to the left side of the anchor.
Vertically aligns the center of the objects to the center of the anchor.
Aligns the right side of the objects to the right side of the anchor.
Aligns the top of the objects to the top of the anchor.
Horizontally aligns the center of the objects to the center of the anchor.
Aligns the bottom of the objects to the bottom of the anchor.
Places the center of the objects over the center of the anchor.
Adjusts the horizontal spacing evenly among the selected objects.
Adjusts the vertically spacing evenly among the selected objects.