Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 22)

22 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 2 RSFieldbus Software Basics
Drawing Toolbar
Toolbar Icon Description
Used to selects items. To select more than one item, press Shift.
Used to modify drawn objects.
Used to draw rectangles. To draw a square, press Shift.
Used to draw rounded rectangles. To draw a rounded square, press Shift.
Used to draw ellipses. To draw a circle, press Shift.
Used to draw arcs. To draw an arc whose height is equal to its width, press Shift.
Used to draw sections of a pie. To draw a section whose height is equal to its
width, press Shift. To expand the section beyond 90°, click Modify.
Used to draw a chord. To draw a section whose height is equal to its width, press
Shift. To draw a chord that is rounded on the top, click and drag to the right. To draw
a chord that is rounded on the bottom, click and drag to the left. To expand the
chord, click Modify.
Used to draw sections of a ring. To draw a section whose height is equal to its
width, press Shift. To expand the section beyond 90°, click Modify.
Used to draw a line. Press Shift to draw lines at 45° and 135°. Press Control to
draw lines at 0° and 90°.
Used to draw a pipe. Press Shift to draw pipes at 45° and 135°. Press Control to
draw pipes at 0° and 90°.
Used to draw a polyline. Left-click to begin the line and change its direction,
right-click to end the line. Press Shift to draw lines at 45° and 135°. Press Control to
draw lines at 0° and 90°.
Used to draw a polygon. Left-click to begin the shape and change its direction,
right-click to end the shape. Press Shift to draw lines at 45° and 135°. Press Control
to draw lines at 0° and 90°.
Used to add text to the drawing.
Lets you add a .bmp file to the drawing.