Offline characterization – Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual User Manual
Page 56

56
Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3
Create an RSFieldbus Software Project
Offline Characterization
This section explains how to configure function block parameters offline.
Do these steps.
1.
In the Fieldbus (H1) window, right-click the desired block and choose
Off Line Characterization.
The Off Line Characterization dialog box appears.
2.
Click
to view all parameters.
3.
Select a desired parameter and click Edit at the bottom of the dialog box.
4.
Enter a value and click End Edit.
This manual is related to the following products:
- 1757-FFLDC2 FOUNDATION Fieldbus System User Manual 1757-FFLD4 FOUNDATION Fieldbus System User Manual 1757-FFLD2 FOUNDATION Fieldbus System User Manual 9308-RSFB1024ENE FOUNDATION Fieldbus System User Manual 9308-RSFB256ENE FOUNDATION Fieldbus System User Manual 9308-RSFB64ENE FOUNDATION Fieldbus System User Manual