Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 60)

60 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3 Create an RSFieldbus Software Project
4. Click the Advanced Options tab.
5. Make desired selections and click OK.
6. From the RSFieldbus main menu, choose Save As on the ProjectFile menu.
The Save As dialog box appears.
7. Choose a folder in which to save the template.
8. Enter a name for the template and click OK.
9. To save this base as the default template, from the ProjectFile menu, choose
Save as Default Template.
This template will be used as the base of each device or bridge of that type
that you add to your projects.
Edit the Default Template
Do these steps to modify the default base template.
1. From the ProjectFile menu, choose Open Default Template.
The Open Default Template dialog box appears.
2. Choose the Manufacturer, Device Type, and Device Rev.
3. Click OK.
4. Make changes to the template.
5. From the ProjectFile menu, choose Save as Default Template.
6. Close the template.
IMPORTANT We recommend that you save all templates in the RSFieldbus
software templates folder. Choose Program Files> Rockwell
Software> RSFieldbus> Fieldbus Manager>Templates.