Rockwell Automation 1757-FFLDC4 FOUNDATION Fieldbus System User Manual - Manual (Page 64)

64 Rockwell Automation Publication 1757-UM012A-EN-P - July 2011
Chapter 3 Create an RSFieldbus Software Project
The Open dialog box appears to the default installation folder.
If RSFieldbus software was not installed to the default folder, you must
browse to the folder where it was installed.
3. Double-click the IDShell HSE.ini file.
The FFLDC ControlNet Setup Tool appears.
4. Browse the network and select the 1757-FFLDC linking device that you
plan to use in your RSFieldbus projects.
5. Click the Add Item icon .