Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual
Page 349
Rockwell Automation Publication 1766-UM001H-EN-P - May 2014
309
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
For the elements of the DNP3 Slave Application Layer diagnostic counter
element offset 60 to 74, the counter values available with the structured display
in RSLogix 500/RSLogix Micro software as below.
18
ERR_PACKET_RELEASE
Firmware use only
19-29
Reserved
-
30
ERR_CONN_REJECTED
Incoming Connection is rejected by the IP address validation.
31
ERR_INVALID_HEADER_CRC
Received packet header has invalid CRC.
32
ERR_INVALID_HEADER
Received packet header has invalid packet format.
33
ERR_INVALID_PACKET_CRC
Received packet has invalid CRC.
34
ERR_BAD_PACKET_RECEIVED
Received packet is unknown.
35
ERR_PACKET_REJECTED
Received packet is rejected.
36
ERR_CONNECTION_BROKEN
The connection has been broken for some reason.
37-49
Reserved
-
50
ERR_INVALID_IP_ADDRESS
Target IP Address is invalid.
51
ERR_INVALID_PORT
Target Port Number is invalid.
52-
Reserved
-
Error Codes
Value (DEC)
Mnemonic
Description