beautypg.com

Rockwell Automation 1766-Lxxxx MicroLogix 1400 Programmable Controllers User Manual User Manual

Page 113

background image

Rockwell Automation Publication 1766-UM001H-EN-P - May 2014

71

Using the LCD Chapter 5

• LCD Edit Disable is set to unchecked(disable)

• The TUF element of the LCD Function File is set to 3 to specify the bit

file B3 as the target bit file to monitor on the LCD, as shown in the screen
capture below.

• The controller mode is set to REMOTE RUN.

This manual is related to the following products: