Rockwell Automation 1336F PLUS II User Manual - Firmware 1.xxx-6.xxx - Manual (Page 67)

Chapter
4
Flash Memory
The 1336 PLUS II stores its operating firmware in state-of-the-art
Flash Memory. Chapter 4 will briefly describe flash memory and the
method available to upgrade the drive firmware in the event that soft-
ware enhancements become available.
What is Flash Memory? The firmware (including parameter layout and operating algorithms)
resides in a form of programmable read-only memory called “Flash
Memory.” Flash memory allows the user to easily upgrade the drive
firmware locally using a standard computer and a Firmware Down-
load Module (1336F-FDM). The latest firmware files are available on
the Internet or from your local sales office.
Firmware Download
Requirements The necessary file can be downloaded from the Internet with a com-
puter (IBM

compatible recommended) having the following:
• Disk drive (hard or floppy)
• Standard communications program capable of XMODEM protocol
• Standard serial “COM” port and connecting cable
• Internet access with browser software
In addition, the following is recommended:
• Windows 95

Operating System
A Firmware Download Module must be installed in the Adapter 1
location of the drive to allow access to drive memory. Detailed
instructions are included with the board.