Rockwell Automation 1395 Digital DC Drive FRN 5-10.10/9.30 - Manual (Page 12)

Chapter 1
Introduction, Inspection & Storage, and
Publication References
1-2
Standard Drive Features The 1395 is a microprocessor Digital DC Drive available in;
•
Four quadrant, armature regenerative, two quadrant field:
– 1 – 300 HP @ 230VAC in standard 1395 enclosures
– 400 – 700 HP @ 230VAC in Bulletin 2100 CENTERLINE motor
control centers (MCCs)
– 2 – 600 HP @ 460VAC in standard 1395 enclosures
– 700 to 1750 HP @ 460VAC in MCCs
– 750 to 2250 HP @ 575VAC in MCCs
– 750 to 2500 HP @ 660VAC in MCCs
•
Non–regenerative:
– 1 – 30 HP and 125 to 300 HP @ 230VAC in standard 1395
enclosures; 400 to 700 HP @ 230VAC in MCCs.
– 2 to 60 HP and 250 to 600 HP @ 460VAC in standard 1395
enclosures; 700 to 1750 HP @ 460 VAC in MCCs.
– 750 to 2250HP @ 575VAC in MCCs
– 750 to 2500HP @ 660VAC in MCCs
NOTE: For information on high horsepower 1395 drives packaged in
MCCs, refer to publication 2361–5.01. This publication contains:
– hardware descriptions of 1395 drives rated at or above 700 HP @
460VAC, 750HP @ 575/660VAC.
•
Fused AC input
•
DC Contactor
•
Field regulation over a 6 to 1 speed range.
•
Programmable Functions:
– Independent Acceleration/Deceleration adjustment
– Preset Speeds, Jog Speeds
– Current Limit, Tapered Current Limit
•
Protective Features:
– Instantaneous Overcurrent, Motor Overload
– Feedback Loss, Field Loss, Field Economy
•
Open Chassis Construction
•
UL Listed/CSA Approved
•
Basic Input/Outputs
Options
•
Discrete Adapter Board Provides:
– 4 Digital Inputs, 120VAC
– 2 Digital Outputs, Contact type 125VAC
– 4 Analog Inputs, 4 Analog Outputs, +/– 10VDC
•
Discrete Adapter Board Provides:
– 4 Digital Inputs, 24VDC
– 2 Digital Outputs, Contact type 24VDC
– 4 Analog Inputs, 4 Analog Outputs +/– 10VDC
•
Digital Reference Adapter Board Provides:
– 1 Digital Reference Input
– 10 Discrete Inputs, 5 Discrete Outputs, 24VDC
– 2 Analog Inputs +/–10VDC, 2 Analog Outputs +/–10VDC