Rockwell Automation 22-COMM-C ControlNet Adapter User Manual

Page 159

Index-3

I/O

about, 5-1
configuring the adapter for, 3-3
configuring the network for

ControlLogix controller, 4-1
PLC-5 controller, 4-12

definition, G-3
image, 5-2, 7-5
using example program for

ControlLogix controller, 5-5
PLC-5 controller, 5-8

Identity object, C-2

Idle Flt Action parameter, B-3

installation

applying power to the adapter, 2-7
connecting to the drive, 2-4
connecting to the network, 2-3
preparing for, 2-1

Internal Interface cable

connecting to the adapter, 2-4
connecting to the drive, 2-4
illustration, 2-4

LEDs, see status indicators

Logic Command/Status

bit definitions, D-1
definition, G-4
in I/O image, 5-2, 7-5
using, 5-3

manual

conventions, P-2
related documentation, P-1
web site, P-1

mechanical dimensions, A-1

messages, see Explicit Messages or

I/O

MOD status indicator

locating, 8-1
troubleshooting with, 8-3

Mode parameter, B-1

modes of operation, 1-6

mounting the adapter, 2-4 to 2-5

Multi-Drive mode

additional information, 7-36
operating in, 7-1
setting with jumper (J7), 2-2
system wiring, 7-4
using ControlLogix controller

Explicit Message example,

I/O example, 7-9

using PLC-5 controller

I/O example, 7-24

versus Single mode, 7-1

NET A status indicator

locating, 8-1
troubleshooting with, 8-4

NET B status indicator

locating, 8-1
troubleshooting with, 8-4

node address

definition, G-4
setting with parameters, 3-3
setting with switches, 2-2

Non-Volatile Storage (NVS)

operating status, 1-6