Rockwell Automation 22-COMM-C ControlNet Adapter - Manual (Page 109)

Troubleshooting 8-5
The following diagnostic items can be accessed using a PowerFlex
4-Class HIM, DriveExplorer (version 3.01 or higher), or DriveExecutive
(version 3.01 or higher).
Adapter Diagnostic Items in Single Mode
No. Name Description
1 Reserved —
2 Logic Cmd The Logic Command being transmitted to the drive by the adapter.
3 Reference The Reference being transmitted to the drive by the adapter.
4 Reserved —
5 Logic Sts The Logic Status being received from the drive by the adapter.
6 Feedback The Feedback being received from the drive by the adapter.
7 – 22 Reserved —
23 DSI Overrun Errs The number of DSI receive overrun errors.
24 DSI Framing Errs The number of DSI receive framing errors.
25 DSI CRC Errs The number of DSI receive CRC errors.
26 Boot Flash Count The number of boot firmware flash updates made to the adapter after
shipping.
27 App Flash Count The number of application firmware flash updates made to the adapter
after shipping.
28 Node Address SW The current value of the node address switches.
29 CN Packets Rcvd A count of the number of network packets received by the adapter.
30 CN Rx Underflows A count of the number of network receive underflow errors.
31 CN Rx Overflows A count of the number of network receive overflow errors.
32 CN Rx Bad Frames A count of the number of network receive bad frame errors.
33 CN Packets Sent A count of the number of network packets transmitted by the adapter.
34 CN Tx Underflows A count of the number of network transmit underflow errors.
35 CN Tx Overflows A count of the number of network transmit overflow errors.
36 CN Tx Out Of Steps A count of the number of network transmit out of step errors.
37 CN Tx Blockages A count of the number of network transmit blockage errors.