Sensaphone IMS-4000 Users manual - Manual (Page 87)

85
Chapter 6: PowerGate2
chapter 6: poWergate2
physiCal DesCripTion
The IMS-4000 PowerGate2 is housed in a 17.5"w x 1.75"h x 12.3"d enclosure, which is 1 EIA rack-mount space high.
fronT panel layoUT
The front panel contains eight power inputs corresponding to the eight outlets on the rear, eight 15 Amp breakers, power
LEDs, a serial port and one power indicator LED. See figure below:
Figure 1: Front Panel Layout of the IMS-4000 PowerGate2
1. Power Inputs
2. 15 Amp Breakers
3. RS-232 Serial port
4. Power Indicator LED
rear panel
The rear of the PowerGate2 contains the eight power outlets and the AC power cord. Outlets 1 and 5 can switch up to 10
amps. All other outlets can switch up to 4 amps.
Figure 2: Rear Panel of the IMS PowerGate2
leDs
The power LED will come on whenever the PowerGate2 is plugged into a live 120VAC outlet.
The eight output LEDs on the front panel indicate if the corresponding outlets on the rear are on or off. Note that the LEDs
will only turn on if power is present at the outlet, which means that if no power is connected to the input, the LED will not
turn on.