Sensaphone IMS-4000 Users manual - Manual (Page 66)

IMS-4000 Manual
64
command: traceroute xxx.xxx.xxx.xxx
requesting a powerGate outlet Command
To request a PowerGate Outlet command, send an e-mail message to your IMS-4000 Host with the following information:
To:
Subject: ims4000
username:
email:
command: powergate "" "" on/off/cycle
For example:
To: [email protected]
Subject: ims4000
username: jsmith
email: [email protected]
command: powergate "Gear Rack #1" "Netgear switch #3" cycle
requesting a picture from a Camera
You can receive an e-mail with an attached picture from any camera configured in the IMS-4000. The picture will be cap-
tured when the IMS-4000 receives the e-mail request.
To receive a picture, send an e-mail message to your IMS-4000 Host with the following information:
To:
Subject: ims4000
username:
email:
command: camera
For example:
To: [email protected]
Subject: ims4000
username: jsmith
email: [email protected]
command: camera NY Datacenter
requesting help
You can receive a brief overview of how to use and format two-way e-mail commands, by requesting help.
Send an e-mail message to your IMS-4000 Host with the following information:
To:
Subject: ims4000
username:
email:
command: help
For example:
To: [email protected]
Subject: ims4000
username: jsmith
email: [email protected]
command: help
ConfiGUrinG a ViDeo CaMera
The IMS-4000 is compatible with all axis camera and the Panasonic cameras listed below.
Panasonic:
KX-HCM8
BL-C10A / BL-C210A
KX-HCM10 KX-HCM280
These are all network video cameras that allow you to view live streaming video or capture images to e-mail when an alarm
occurs. The camera or server connects to your network via an RJ-45 jack and supports 10/100 Mbit networks. Up to 128