Sensaphone IMS-4000 Users manual - Manual (Page 56)

IMS-4000 Manual
54
perMissions
Each user profile has a programmable security level for each device (host/nodes) in the system. To set the Security Access
level click the Permissions button. There are three access levels: Master System Administrator, Site Administrator, and User.
The restrictions for each security level is as follows …
Master
System Site
Admin Admin User
Add user profiles Yes No No
Disable user profiles Yes No No
Edit unit properties Yes No No
Edit e-mail settings Yes No No
Edit Node properties Yes No No
Update firmware Yes No No
Configure data logger Yes No No
Add/delete classes Yes No No
Add/delete holidays Yes No No
Edit default input templates Yes No No
Delete sensors Yes Yes No
Disable IP alarms Yes Yes No
Reset min/max Yes Yes No
Other programming changes Yes Yes No
Add camera Yes Yes No
Acknowledge alarms Yes Yes Yes
Switch a PowerGate outlet Yes Yes Yes
Online via local PC Yes Yes Yes
Call in via voice Yes Yes Yes
Call in via modem Yes Yes Yes
Visit password protected Web Yes Yes Yes
To configure a profile as a Master Administrator simply check the box at the top of the screen.
Figure 31: Permissions screen
To configure profiles for Site Administrator or User security levels, select the appropriate Host or Node(s) and click the
arrow to copy the Host/Node(s) into the appropriate list. The double arrow >> will copy all units to the list while the single
arrow > will copy just the selected unit to the list. Checking the box “This user can connect remotely via modem” at the bot-
tom of the screen, allows the user listed at the top of the page to dial in to the system using a modem.