Sensaphone IMS-4000 Users manual User Manual

Page 64

IMS-4000 Manual

Messages can be displayed as text or HTML. Select the type of message you want to enter and type your message into the

text area. This window will scroll to accommodate lengthy actions. Note that using HTML, you can embed web links in the

message for more advanced actions. To test your HTML code, click the Preview button. To return to the edit screen click the

Edit button. See samples below.

Figure 44: HTML Edit Screen and HTML Preview Screen

audible alarm notification

The ConsoleView Software can optionally beep or play a custom Wave file whenever an alarm is detected. To utilize this fea-

ture, click File, then Options from the main menu. Under the Alarm Notification section select Audible Alarm Notification.

Next, select either System Beep or Play Wave. If you selected Play Wave, then you must select the Wave file to be played.

Click on the speaker button to choose a Wave file. After you've made your choice, you can preview it by clicking the Play

button. See sample screen below:

Figure 45: Alarm Notification screen

e-Mail seTUp anD Two-way e-Mail CoMManDs

The IMS-4000 can send alarm messages via e-mail using SMTP as well as respond to commands via e-mail. See the Two-

Way E-mail section for more information on sending commands.
To set up the e-mail parameters right click on the Host name and select Network Settings. Select the Email Settings tab to see

the following screen:

Figure 46: E-mail Settings tab

To have the unit send e-mail, you need to set the SMTP Server name and the Return e-mail Address, Username (if required)

and Password (if required). To have the unit respond to Two-Way e-mail commands you must also set the POP Server name,

e-mail account Username & Password, and the Mail Check Interval.