Sensaphone IMS-4000 Users manual User Manual
Page 23
21
Chapter 1: Installation
raCk MoUnT insTallaTion
The IMS-4000 Host can be rack mounted using the included rack mount brackets. Follow the steps below:
1) Attach rack-mount brackets to the sides of the Host unit with a Phillips screwdriver.
2) Attach the unit to the equipment rack using two pan-head screws per side. Tighten the screws with a Phillips
screwdriver.
3) Plug the power cord into a 100–250VAC 50/60Hz outlet.
Figure 3: Rack-mounted Host Unit
wall MoUnT insTallaTion
The IMS-4000 Host can be wall mounted using the optional wall mount brackets. Follow the steps below:
1) Attach the optional wall mount brackets to the sides of the IMS-4000 using the eight black #6-32 screws. A Phillips
screwdriver will be required. (Order part # IMS-4406 Universal Wall Mount Kit)
2) Attach the unit to the wall using two screws per side. Tighten the screws with a Phillips screwdriver.
3) Plug the power cord into a 100–250VAC 50/60Hz outlet.
Figure 4: Wall-mounted Host Unit
TableTop insTallaTion
The IMS-4000 Host can be installed on a tabletop or shelf. Follow the steps below:
1) Attach the four self-adhesive rubber feet to the four corners on the bottom of the IMS-4000.
2) Place the unit on a tabletop or shelf and connect the power cord into a 100-250VAC outlet.
Figure 5: Tabletop-mounted Host Unit