Sensaphone IMS-4000 Users manual - Manual (Page 8)

IMS-4000 Manual
vi
fcc requIrementS
Part 68: The Sensaphone IMS-4000 complies with 47 CFR, Part 68 of the rules. On the back of the unit there is a label that
contains, among other information, the Certification Number and the Ringer Equivalence Number (REN) for this equip-
ment. You must, upon request, provide this information to your local telephone company.
The REN is useful to determine the quantity of devices that you may connect to your telephone line and still have all of
those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN’s of all devices con-
nected to one line should not exceed five (5.0). To be certain of the number of devices that you may connect to your line,
you may want to contact your local telephone company to determine the maximum REN for your calling area.
The applicable certification jack USOC for this equipment is: RJ11C. The facility interface code (FIC) for this equipment
is: 02LS2.
A compliant telephone cord and modular plug are provided with equipment. This equipment is designated to be connected
to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation
Instructions for details.
This equipment may not be used on coin service units provided by the telephone company. Connection to party lines is
subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission
for information.
Should the IMS-4000 cause harm to the telephone network, the telephone company may discontinue your service temporar-
ily. If possible, they will notify you in advance. But if advance notice isn’t practical, the telephone company may temporarily
discontinue service without notice and you will be notified as soon as possible. You will be informed of your right to file a
complaint with the FCC. The telephone company may make changes in its facilities, equipment, operations, or procedures
where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regula-
tions of the FCC that could affect the proper functioning of your equipment. If they do, you will be notified in advance to
give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with the Sensaphone IMS-4000, or you need information on obtaining service or repairs, please
contact:
Sensaphone
901 Tryens Road
Aston, PA 19014
610.558.2700
Fax: 610.558.0222
If the equipment is causing harm to the telephone network, the telephone company may ask that you disconnect this equip-
ment from the network until the problem has been corrected or until you are sure that the equipment is not malfunction-
ing.
Part 15: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency ener-
gy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Telephone ConsUMer proTeCTion aCT (hosT only)
The FCC Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other elec-
tronic device, including FAX machines, to send a message unless such message contains, in a margin at the top or bottom
of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the
business or other entity, or other individual sending the message, and the telephone number of the sending machine or such