Sensaphone IMS-4000 Users manual - Manual (Page 82)

IMS-4000 Manual
80
chapter 5: poWergate
physiCal DesCripTion
The IMS-4000 PowerGate is housed in a 17"w x 1.75"h x 10"d enclosure, which is 1 EIA rack-mount space high.
fronT panel layoUT
The front panel contains a 15 Amp breaker, Output LEDs, the serial port and power indicator. See figure below:
Figure 1: Front Panel Layout of the IMS-4000 PowerGate
1. 15 Amp Breaker
2. Output LEDs
3. RS-232 Serial port
4. Power Indicator LED
rear panel
The rear of the PowerGate contains the eight power outlets and the AC power cord.
Figure 2: Rear Panel of the IMS PowerGate
leDs
The power LED will come on whenever the PowerGate is plugged into a live 120VAC outlet.
The eight output LEDs indicate if the corresponding outputs on the rear are on or off. The eight outputs can supply up to 12
Amps total current (all outlets combined).
insTallaTion
This section provides information on:
• Operating environment
• Rack and tabletop installation
• Connecting sensors