SATEC EM132-133 Manual - Manual (Page 84)

‎Chapter 5 Configuring T H E E M 1 3 X S E R I E S
84 EM13x Series SMART MULTIFUNCTION METER
Display
Label
Parameter Options Default Description
Start Day DST Start Day The weekday Sunday The 2 nd Sunday of the
month when Daylight
Saving Time begins.
Start Hour DST Start Hour 1-6 2 The hour when Daylight
Saving Time begins.
dSt.E DST End
Weekday
Month-week-weekday
Week = 1, 2, 3, 4 or L
(last week of the month)
First Sunday
in November
The date when Daylight
Saving Time ends.
End Mon DST End Month January to December November The month when Daylight
Saving Time ends.
End Week DST End Week 1 st to 4 th and last First The 1 st week of the month
when Daylight Saving Time
ends.
End Day DST End Day The weekday Sunday The 1 st Sunday of the
month when Daylight
Saving Time ends.
End Hour DST End Hour 1-6 2 The hour when Daylight
Saving Time ends.
Clock Sync Time
Synchronization
Input
None
DI1 1PPM
DI2 1PPM
DI3 1PPM
DI4 1PPM
DI5 1PPM
DI6 1PPM
DI7 1PPM
…
DI14 1PPM
None The external port receiving
the time synchronization
pulses
Daylight Saving Time
When the daylight saving time is enabled, the meter automatically
advances the device clock by one hour when daylight saving time
begins and puts the clock back one hour when it ends. The default
daylight saving time change points are preset for the U.S.A.
The daylight saving time option is disabled in the PM130 by default. If
the daylight saving time option is disabled, you need to manually
adjust the device clock for daylight saving time.
Time Synchronization Pulses
External time synchronization pulses can be delivered through one of
the digital inputs.
If a digital input is selected as the time synchronization source, the
edge of an external pulse adjusts the device clock at the nearest whole
minute. The time accuracy could be affected by the debounce time of
the digital input, and by the operation delay of the external relay.
5.3 Configuring Meter Security
This setup allows changing the user password and enabling or disabling
password protection. The EM13X Series provides 3 configurable
passwords.
The password in your meter is preset to 0 at the factory, and password
protection is disabled.