SATEC EM132-133 Manual - Manual (Page 10)

‎Chapter 1 General I N F O R M A T I O N
10 EM13x Series SMART MULTIFUNCTION METER
Chapter 1 General Information
The EM13X Series is a compact, multi-function, three-phase AC
Powermeter specially designed to meet the requirements of users
ranging from electrical panel builders to substation operators.

The EM13X Series measuring and power supply inputs comply with
Measuring Category III
The EM13X Series offers standard voltage, current, power and
frequency measurements, amp-demand, energy measurements and
data logging, harmonic analysis and control capabilities.
The EM13X Series consists of two different models:
 EM132/EM133 with Auxiliary Power Supply
 EM133-SE – self energized device with 3 Phase Power Supply,
operating from any combination of the measured phases
Both models include the following units:
 2 lines of 16 characters LCD display.
 A standard RS-485 communication port, Infra Red Communication
port and an additional optional Ethernet, Profibus or RS-232/RS-
422/RS-485 or RF Modem port. These ports allow local and
remote automatic meter readings and setup through the
supplemental communication or user data acquisition software.
 Different communication options for remote communications with
the meter. These options enable LAN and Internet communication
with the unit.
 Two digital inputs with 10-ms scan time and one relay output with
1-cycle update time
The EM13X Series is suitable for mounting on both standard DIN-Rail
and wall-mount.