SATEC EM132-133 Manual - Manual (Page 65)

‎Chapter 5 Configuring T H E E M 1 3 X S E R I E S
EM13x Series SMART MULTIFUNCTION METER 65
The following table lists available GPRS options.
Table 5: GPRS Setup Options
Parameter Default Description
Access Point Name (APN) internetg The mobile network APN name
User name Username (if required)
Password Password (if required)
 Configure your mobile network APN, username and
password. Consult your network operator regarding
proper network settings. Leave the username and
password fields blank if network authorization is not
required.
 Send your GPRS settings to the meter.
 Select the GPRS interface in the COM2 port setup (see
Setting Up Serial Communication Ports ).
 Configure your eXpertPower client (see Setting Up
eXpertPower Client ) or/and TCP Notification client (see
Setting Up TCP Notification Client ) for communicating
with a remote server.
You can check the status of the GPRS communications from the front
panel via the
Status Display or via the Device Control dialog in PAS
(see Viewing Communication Status and Statistics ).
Setting Up eXpertPower Client
The PM130 PLUS has an embedded eXpertPower TM client that provides
communications with the eXpertPower TM server – the SATEC
proprietary Internet services. Connections to the eXpertPower TM server
are handled on a periodic basis.
To set up communications with the eXpertPower TM server, select
Communication Setup from the Meter Setup menu, and then click
on the ExpertPower Client Setup tab.