Setting up gprs network – SATEC EM132-133 Manual User Manual

Page 64

Text mode
Original mode

‎Chapter 5 Configuring T H E E M 1 3 X S E R I E S

EM13x Series SMART MULTIFUNCTION METER



When you change the device network settings through
the Ethernet port, the device port restarts so
communication will be temporarily lost. You may need
to wait some additional time until PAS restores a
connection with your device.Setting-Up Dial-Up GPRS
Network

Setting up GPRS Network

Using the Front Display

The EM13X Series can provide wireless GPRS communications with the
remote Modbus/TCP server via an external Enfora GSM1308 SA-G+
GSM/GPRS modem. See

Connecting a GSM/GPRS modem

in Chapter 2

on how to connect a modem to your meter.

Using PAS



Select Communications Setup from the Meter Setup
menu, and then click on the GPRS Setup tab.

Select Communications Setup from the Meter Setup menu, and

then click on the GPRS Setup tab.

Figure ‎5-3: Communication Setup Dialog Box – GPRS Setup Tab