SATEC EM132-133 Manual - Manual (Page 74)

‎Chapter 5 Configuring T H E E M 1 3 X S E R I E S
74 EM13x Series SMART MULTIFUNCTION METER
Configuring Relay Outputs
The PM130 PLUS can be provided with one relay (standard) and 2 or 4
optional relay outputs. Each relay can be operated either locally from
the alarm/control setpoints in response to an event or by a remote
command sent through communications. It can also be linked to an
internal pulse source to produce energy pulses.
Using PAS
Select General Setup from the Meter Setup menu, and then click on
the Relay Outputs tab.
Figure ‎5-9: General Setup Dialog Box – Relay Outputs Tab