SATEC EM132-133 Manual - Manual (Page 83)

‎Chapter 5 Configuring T H E E M 1 3 X S E R I E S
EM13x Series SMART MULTIFUNCTION METER 83
Using the Front Display
Select Local from the main menu. See Viewing and Changing Setup
Options in Chapter 3 for information on configuring parameters via the
front display.
Using PAS
Select General Setup from the Meter Setup menu, and then click on
the Local Settings tab.
Figure ‎5-13: General Setup Dialog Box – Local Settings Tab
The available options are described in Table 17.
Table 17: Local Time Options
Display
Label
Parameter Options Default Description
Date Order Day/month/year
order
DD/MM/YY
MM/DD/YY
YY/MM/DD
DD/MM/YY Defines date order
presentation
Country Country code Default, or country
name
Default Defines calendar setting.
The default setting stands
for the U.S.A.
Daylight Daylight Saving
Time
Disabled
Enabled
Disabled When DST is disabled, the
RTC operates in standard
time only. When enabled,
the meter automatically
updates the time at the pre-
defined DST switch dates.
Start Mon DST Start Month January to December March The month when Daylight
Saving Time begins.
Start Week DST Start Week 1 st to 4 th and last Second The 2 nd week of the month
when Daylight Saving Time
begins.
Locak Exit