SATEC EM132-133 Manual - Manual (Page 58)

‎Chapter 3 Using F R O N T D I S P L A Y
58 EM13x Series SMART MULTIFUNCTION METER
If an option is represented by a list of values, use the SCROLL button
to scroll through the list until a desired value appears in the window. It
an option is represented by a numeric value, use the SCROLL button to
adjust each digit to the desired value, and use a short press on the
SELECT/ENTER button to move through digits.
Once the desired value is selected, press the SELECT/ENTER button for
more than 1 second to save your new setting. You return to the upper-
right window and can continue scrolling through the rest of options or
can return to the main menu
If you wish to leave the option value unchanged, use a short press on
the SELECT/ENTER button to return to the upper-right window.
To exit the submenu and return to the main menu:
 If the upper-right window is not highlighted yet,
highlight it by briefly pressing the SELECT/ENTER
button.
 Press the SELECT/ENTER button for more than 1
second. You will return to the main menu.
To exit the main menu and return to the data display:
 Press briefly the SELECT/ENTER button to highlight the
right-upper Exit window.
 Press the SELECT/ENTER button for more than 1
second. You will return back to the data display.