Quadrox QGuard User Manual - Manual (Page 97)

QGuard User Manual 97
Version 4.9 Series
3.3.6 Mosaics
This menu allows you to configure the settings for the mosaics viewing mode which provides
enhanced surveillance capabilities as you can monitor video from several cameras on one
screen simultaneously. This chapter explains how to add and configure the mosaic views in
QGuard.
Mosaic Menu Screen
To add a mosaic, choose one of the 9 available mosaic views by clicking on the icon of the
desired mosaic view. The mosaics view will be added to the list of Defined Mosaics.
There are 9 available mosaic views:
2x2 A square with two images on top and two below.
Zoom+3 One of the images appears large, and three others are small.
Zoom+5 One of the images appears large, and five others are small.
Zoom+7 One of the images appears large, and seven others are small.
3x3 A square with three times three images.
3x2 A square with two times three images.
2 Zoom + 8V Two of the images appear large, and 8 others are small at the
left.
2 Zoom + 8H Two of the image appears large, and 8 others are small at the
bottom.
4x4 A square with four times four images.
To Edit or configure a mosaic view, click the Edit link and follow the steps below: