Quadrox QGuard User Manual - Manual (Page 96)

QGuard User Manual 96
Version 4.9 Series
Single View Sequence Settings Screen
Camera Switching Sequence setting allows the adding or removing of cameras at any
time. This allows you to dynamically monitor the most significant areas.
The sequence time option defines the duration of the interval between each camera
view.
To edit or configure a sequence, click the Edit link and follow the steps below:
Single View Sequence Settings Screen
1. Specify a Name for the sequence.
2. Select Frame rate.
3. Add cameras to the sequence:
a. Select camera from the drop-down list.
b. Click Add Camera button.
c. Specify Sequence time for every camera.
Sequence time for a camera is the time span during which QGuard shows this
camera.
d. Use Sort buttons to change the position of a camera in the sequence.
To delete a camera, click the Delete link.
e. Click Apply button. You will return to the Single View Settings Screen.