Quadrox QGuard User Manual - Manual (Page 138)

QGuard User Manual 138
Version 4.9 Series
4.3.4.3 Full Screen Mode
Full screen mode allows you to visualize video by using the full screen. When going to full
screen the activity line and camera buttons are hidden by default. You can unhide them by
clicking the
icon.
Full Screen mode is not the same as pressing F11 in Internet Explorer.
To enter the full screen mode, click the icon.
To leave the full screen mode, click the icon at the right top corner or press any key on
the keyboard.
Full Screen Mode
4.3.4.4 Low/High Bandwidth Mode
Low/High bandwidth mode allows you to decide if you want to have streaming video that
consumes a reduced bandwidth. You can choose between:
 High Bandwidth Mode (Default) – High Bandwidth mode is used preferably on local
computers (when the QGuard client is located on the same machine as the QGuard
server), in local area networks or with high-speed Internet connections. Use the High
( ) button to enable high bandwidth mode.
 Low Bandwidth Mode – Low bandwidth mode is mostly used in medium- or slow-
speed LAN or Internet connections. When Low Bandwidth mode is enabled, the frame