Quadrox QGuard User Manual - Manual (Page 40)

QGuard User Manual 40
Version 4.9 Series
Activity calculated on camera is supported for most models of the following brands:
ACTi, Axis, Ernitec, IQEye.
If activity is recorded or not depends on the camera activity detection algorithm. If
you notice problems with recordings, please contact the camera manufacturer for
support.
Activity on Camera (Network camera) Screen
Click Next to enter the next Camera Wizard screen.
3.3.1.2.6 PTZ
This tab is present for both analogue and network PTZ cameras, however only analogue PTZ
cameras can be configured
PTZ stands for Pan Tilt Zoom, or a "movable" camera. To enable the PTZ camera
settings, select the PTZ camera checkbox.
 PTZ camera – check this if your camera is a PTZ camera
 PTZ control protocol – select the brand of the PTZ camera
 Extended PTZ – Some protocols have extended PTZ features; e.g. Pelco. By
checking this, these extended features will be made available.
 Communication port – serial communication port used for PTZ communication.
 Camera unique number – most PTZ cameras require a unique serial number to be
referred by.
Click Next to enter the next Camera Wizard screen.