Quadrox QGuard User Manual - Manual (Page 130)

QGuard User Manual 130
Version 4.9 Series
To enter the full screen mode, click the icon.
To leave the full screen mode, click the icon at the right top corner or press any key on
the keyboard.
Full Screen Mode
4.3.2.6 Low/High Bandwidth Mode
Low/High bandwidth mode allows you to decide if you want to have streaming video that
consumes a reduced bandwidth. You can choose between:
 High Bandwidth Mode (Default) – High Bandwidth mode is used preferably on local
computers (when the QGuard client is located on the same machine as the QGuard
server), in local area networks or with high-speed Internet connections. Use the High
( ) button to enable high bandwidth mode.
 Low Bandwidth Mode – Low bandwidth mode is mostly used in medium- or slow-
speed LAN or Internet connections. When Low Bandwidth mode is enabled, the frame
rate and the resolution of the images are reduced. This leads to a reduced bandwidth
usage for streaming. Use the Low ( ) button to enable low bandwidth mode.
4.3.2.7 Snapshots
This QGuard feature gives you the opportunity to make snapshots. To create a snapshot,
follow the steps below: