Quadrox QGuard User Manual - Manual (Page 18)

QGuard User Manual 18
Version 4.9 Series
3 Video Manager
To log on to the Video Manager application, you need administrative rights.
This chapter provides an overview of the QGuard Video Manager Control Panel and the
following QGuard functions:
 Users
 Server Settings
 General Server Information
3.1 Video Manager Control Panel
Network status indicator
The green dot, in the top left corner, indicates a good network status. When the
indicator is red, the QGuard is experiencing network problems which can result
in slow response from the Web Application, or no response at all.
Users
Click this button to access the Users screens where you can add or delete users,
give different user rights, check Connected Users and User Actions logs.
Settings
Click this button to change the QGuard settings to your requirements.
Info
Click this button to see general server information. This section also provides
access to Network Diagnostics, System Downloads and the Server logs.
Hide Control Panel
Click this button to hide or retrieve the control panel.
Restart
Click this button to restart the video server. Usually there’s no need to restart the
server unless the Restart button becomes red.
Video
Click this button to open the Video Browser application.
Help
Click this button to access QGuard Online help.
Log Off
Click this button to change user.
Exit
Click this button to exit the QGuard application.