Quadrox QGuard User Manual - Manual (Page 95)

QGuard User Manual 95
Version 4.9 Series
3.3.5 Single View
This menu allows you to configure the settings for the single camera live viewing mode. The
Single View menu contains the following parameters:
 Frame rate
 Sequence
Single View Settings Screen
3.3.5.1 Frame rate
The frame rate set by this parameter is the frame rate for the live view visualisation. The
possible
Frame Rate ranges from 0.5 to 30 fps (frames per second). The real frame rate
depends on the available network bandwidth and the camera model. In order to set a desired
frame rate follow the steps below:
1. Select the frame rate value from the drop-down list.
2. Click Apply button.
It is recommended to test the various settings in order to choose the optimal Frame
Rate and the desired quality of the image.
By default the live view frame rate is 12 fps.
3.3.5.2 Sequence
The Camera Switching Sequence allows you to create a sequence of cameras in which
cameras will switch in a defined order after a certain time interval set for every camera
independently.
You are able to create different sequences with different settings. To add a sequence, click
Add Sequence button. The following screen will be opened: