Quadrox QGuard User Manual - Manual (Page 74)

QGuard User Manual 74
Version 4.9 Series
3.3.3.2.1 Device Name
In this tab, you can adjust the Generic POS device name. It’s a part of the POS Device
Configuration Wizard.
Name (Generic POS) Screen
Click Next to enter the next POS Device Configuration Wizard Screen.
3.3.3.2.2 Device Protocol
In this tab, the protocol has to be selected. It’s a part of the POS Device Configuration
Wizard.
Select Generic POS in the drop-down list.
Protocol (Generic POS) Screen
Click Finish button.
Depending on the drivers you installed together with the Alarm Component, it’s
possible some options are not present in the drop-down list.
If you entered the POS Device Configuration Wizard by clicking the Edit Device link
in the POS Screen, you can no longer change the protocol.
3.3.3.2.3 Device Connection
This tab is not available for Generic POS Devices. You don’t have to configure it.